Skip to main content
Heat PumpsProject Spotlights

Milton Heat Pump Installation: Trane Oil-to-Electric Conversion

New Trane air handler and Aprilaire air cleaner installed in a Milton basement, replacing an oil furnace

Pacific Heating, Cooling, Plumbing & Electrical completed a Milton heat pump installation, replacing an older heating oil furnace with a quiet Trane heat pump and air handler system that now heats and cools the home without oil deliveries.

Project Overview

  • Location: Milton, WA 98354
  • Home Type: Single-family home, about 1,500 sq ft, with basement equipment area
  • System Type: All-electric heat pump and air handler for year-round heating and cooling
  • Completion Date: October 9, 2026
  • Lead Technician: Jason Rodeberg
  • Prior System: Frigidaire heating oil furnace in the basement
  • New System Capacity: Sized for a 1,500 sq ft home

The Challenge

This Milton home was heated by an older oil furnace in the basement. Every winter meant buying heating oil by the gallon, and the home had no central air conditioning for summer.

The homeowner wanted to move off oil completely and get one system that could heat in winter and cool in summer. During the in-home visit, our comfort adviser measured the existing ductwork and electrical service so the plan was clear before any work began.

The project needed to:

  • Replace the oil furnace with an all-electric system that heats and cools
  • Enlarge the main supply and return duct connections so the new system could move air easily
  • Add new electrical circuits for both the indoor and outdoor equipment
  • Run new thermostat wiring for modern system controls
  • Add a condensate pump to drain water away from the basement equipment
  • Improve filtration for cleaner indoor air

Our Solution

Milton heat pump installation: new Trane heat pump outdoor unit on a new pad beside the home

The new Trane heat pump now handles both heating and cooling for this Milton home.

Pacific removed the oil furnace and installed a Trane heat pump outside with a matching Trane air handler in the basement. The air handler is the indoor unit that moves warm or cool air through the home’s existing vents. Both units use variable-speed motors, so they ramp up and down gently instead of switching hard on and off.

Our crew modified the main duct trunk line so air flows freely to all nine supply registers. We ran two new electrical circuits, new thermostat wire, and a condensate pump, then capped the old oil line at the equipment. Pacific handled the permits, inspections, and registration, so the homeowner did not have to.

The work took two install days. Before each day, our installers walked the homeowner through the plan so there were no surprises. That is what we mean when we say “We don’t just install equipment. We help you understand it.”

 

Equipment List

  • Heat Pump: Trane Premier Series Variable-Speed Heat Pump (5TWV8X36), 3-ton variable-speed system rated at 18 SEER
  • Air Handler: Trane TEM C Variable-Speed Air Handler (5TEMCB03), variable-speed ECM blower with an all-aluminum coil
  • Backup Heat: Trane 10 kW Electric Heat Strip (BAYHTR1510BRKC), 32,800 BTU of supplemental heat for the coldest days
  • Thermostat: Trane Link 360 Smart Thermostat (TLINK360A2VVUD), Wi-Fi control with a 7-inch color touchscreen
  • Air Cleaner: Aprilaire MERV 11 Air Cleaner, 4-inch media filter for improved filtration
  • Drainage: Condensate pump with overflow safety switch for the basement air handler

Performance and Comfort Benefits

  • No more heating oil purchases or oil deliveries
  • One system now provides both heating and air conditioning
  • Very quiet operation, since the motors run at low speed most of the time
  • More even temperatures from room to room as the system adjusts to the weather
  • Better airflow through the enlarged duct connections
  • Cleaner indoor air from the upgraded media filter
  • Easy control from a phone, tablet, or the touchscreen thermostat
  • Backup heat ready for the occasional deep freeze

Protection and Guarantees

Every Pacific installation comes backed by our full Quality Assurance Guarantee package.

  • No-surprise pricing
  • 100% money-back guarantee
  • Comfort guarantee
  • 10-year parts warranty
  • 3-year labor warranty
  • Property protection guarantee

Read All Quality Assurance Guarantees

Customer Feedback

5-Star Review from Ryan in Milton
★★★★★

Pacific did an amazing job installing a Trane heat pump and air handler link system to replace my old heating oil furnace. It’s amazing how much more advanced modern equipment is compared to my old system. Super quiet with variable speed motors. No more paying $6-7/gallon for heat! Their installers were great at communicating the plan for each install day and exceeded my expectations all around. Great job!

Ryan in Milton, Google review, October 2026

Why This Matters for Milton Homeowners

A Milton heat pump installation lets homes still heated by oil switch to one electric system that heats and cools. Homeowners stop buying heating oil, gain air conditioning for summer, and get quieter, more even comfort. Pacific handles the ductwork, electrical, permits, and inspections from start to finish.

Many older homes in Milton and the surrounding South Sound still have oil furnaces in the basement. Western Washington’s mild, damp winters are a good match for a heat pump, and backup heat covers the few cold snaps each year. Summers are getting warmer too, so cooling is a welcome bonus.

Based on our service records, Pacific completed more than 1,600 heating and cooling system installations across Tacoma and the South Sound over the past two years. Pacific has served this area since 1984, with NATE-certified technicians and more than 7,000 Google reviews averaging 4.9 stars. If you want to compare options first, our heat pump purchase guide lays out what to expect.

Thinking about a heat pump for your home?

Tell us about your home and your current system, and we’ll walk you through your options with clear, upfront pricing. Pacific Heating & Cooling has been installing heating and cooling systems across Tacoma and the South Sound since 1984, and we handle permits, inspections, and registration for you.

(253) 581-5272